Oil Filter Spin-On Type [ GFE147 alt] GFE173
£5.04 INC VAT
Spin-On Cannister type Cooper branded filter used in conjunction with a Spin-On Adapter.
Although not original equipment the equivalent to this filter has been used by us for many years having delivered over 95000 miles of trouble free performance with no undue loss of oil pressure.
This filter and the oil should be changed at 3000 miles to maintain long term oil pressure and generally optimise performance of moving parts.
Fits the spin on adapter.
Lighter than longer type/ easier to remove.
Better for your garage floor, and the planet.
Fills quickly on starting after fitment.
Better for your bearings
Includes non return valve and a by pass valve (14psi) should it become blocked.
The Filter is heavy at 350 grams meaning a postage cost of £4.30
Fitting: We use a webbing wrench by Draper with a short extension bar in the ratchet drive to remove these.
To fit them, we mark the base with a piece of masking tape, note the position of the mark at the moment the seal connects with the adapter face, and then hand turn a further 270 degrees. For the last 20 degrees or so the webbing wrench may be used again, but on no account over tighten or future removal will be very difficult. If oil drips from your spin on filter, it is unlikely to be incorrect fitting of your filter.
It is an Incorrect Application see Terms and Conditions